You are here:Tech Tips >
I installed the axle extender on the shifter side of the bike as instructed. The fork doesn't reach frame now. What do I do?
Last Updated: 05/07/2021
Thanks for following our last instruction and not using the axle extender on the left side where it wasn't required. You had enough thread there and that firmly mounts our bracket to the frame. Now that you have the axle extender on the right side with the shifter mechanism, you'll need to bend the fork as in the instruction sheet so it makes contact with the frame and stops the bracket from rotating.

You can now follow this instruction video to see how this is done.

Happy Riding!


Was this blog post helpful?